How to install Taishan infrared burner?
1. The equipment shall be installed by professional personnel in strict accordance with the skill documents provided by the company, and the external wiring shall be in strict accordance with the wiring diagram provided by the equipment.
2. The equipment and its components transfer and device process shall be carried out smoothly to avoid impact and collision. All parts of the equipment shall be fixed in place in the correct way. All burner parts shall be able to keep the original correct orientation after disassembly and reassembly.
3. The connection between burner and gas pipeline should be hard pipe connection. If flexible hose connection is used, it should meet the pressure resistance requirements of gas pipeline.
4. There shall be no obstructions around the filter of burner fan to avoid affecting the air inlet volume; Filters should be sorted out on time.
5. The gas supply pipeline should be purged before the unit, and the impurities in the gas supply pipeline may hinder the operation of the burner.
6. Before installation, check whether the position of ignition needle and ignition electrode, and the position of detection rod and burner meet the standard requirements.
Article source: Taishan infrared burner http://www.tsheneng.com
-
05-28
Infrared furnace head manufacturer: what is ceramic infrared heater?
The ceramic infrared heater is composed of resistance thermal conductor embedded with appropriate ceramic materials. Because all of them are embedded in the ceramic, the energy generated by the thermal conductor can be transmitted to the surrounding materials, which can not only avoid overheating of the thermal conductor, but also extend its service life. The data used for embedded thermal conductors need to be insulated and have good absorption and radioactivity within the set range of infrared
-
05-28
How to install infrared ceramic chip for infrared burner manufacturer?
The bonding of infrared ceramic chips usually includes cleaning, drying, bonding, drying, sintering and other steps. 1. Tank cleaning. The tank which needs to replace ceramic chips is dirty, which will affect the quality of incineration and the firmness of bonding. It needs to be cleaned after full soaking (recommended time is 24 hours). It can be cleaned with steel ball, screw driver, toothbrush, test tube brush and other things.
-
05-28
What are the advantages of Taishan infrared burner?
Advantages of Taishan infrared burner: 1. Oil stove, smoke, save gas, do not back the black pot. The real Taishan infrared burner is the technology of flameless ignition. There is no fire on the surface, but there is enough ignition. Basically, there is no smoke. It is more physically and mentally healthy in the whole process of application at home
-
05-28
What does Taishan infrared stove rely on for heating?
1. We know that the infrared gas stove is not heated by fire, but by the infrared radiation source. The milky white set pot will reflect the radiant heat of the surface and form less heat for digestion and absorption. The objects around the stove are likely to be burnt out. That is to say, the longer the tone of the set pot, the more suitable the infrared gas stove is. The milky white set pot can digest and absorb the radiant heat at least.